编号：SJFDB20222151
产品LOG
质量保函
甲方：_________________________
乙方：_________________________
公证行：_______________________
时间：_________________________
产品LOG质量保函
致_______________________ (甲方名称)：
本保函作为_______________________（乙方）与_______________________（贵方）于_____年_____月_____日就__________项目提供_______________产品服务所签订的《__________合同》(合同编号为：_______________)批量产品产前测试的质量担保函，。
1、项目名称__________________________________________
2、产品名称：22 MM HARD-SIDE LUGGAGE-GREY & 22 MM HARD-SIDE LUGGAGE-BLUE
3、原始测试报告编号HKHL0300456，测试时间：August 25, 2021
4、我司保证，本次所提供的原始测试报告（HKHL0300456）适用于即将批量生产的__________合同的________________________的产品的保证声明。
5、保证产品具有如下代表性（即，在20XX/11-12月份、ELDDFJIDSFSDF WIN(CAMBODIA)CO.,LTD工厂、使用相同材料、相同的工艺生产订单）。测试报告仍然可以使用，具有产品质量保证效益。
6、产品产前测试报告编号HKHL0300456详情见附档文件。
7、并以此约定如下：
a、乙方未能忠实地履行所有合同文件的规定和双方此后一致同意修改、补充和变动，包括更换或修补贵方认为有缺陷的货物(以下简称违约)，只要贵方确定，无论承包人有任何反对，本行将凭贵方的书面违约通知，立即按贵方提出的不超过上述累计总额的金额和按该通知中规定的方式付给贵方。
b、本保证函的规定构成本行无条件的、不可撤销的直接义务。今后任何对合同条款的修改、贵方在时间上的通融、其他宽容、让步或由贵方采取的除了本款以外都适用的可能免除本行责任的任何删除或其他行为，均不能解除或免除本行在本保证函项下的责任。
c、本保证函在本合同规定的质保期满前完全有效。
甲方： 乙方： 公证行：
签字： 签字： 签字：
公章： 公章： 公章：
时间： 时间： 时间：
Number: SJFDB20222151
PRODUCT LOG
QUALITY GUARANTEE
Party A:：_________________________
Party B：__________________________
Date：_____________________________
Product LOG Quality Guarantee
To _______________________ (Name of Party A):
This letter of guarantee serves as the \"__________ Contract\" (contract number It is: _______________) Quality guarantee letter for pre-production testing of mass products.
1. Project name __________________________________________
2. Product name: 22 MM HARD-SIDE LUGGAGE-GREY & 22 MM HARD-SIDE
LUGGAGE-BLUE
3. Original test report number HKHL0300456, test time: August 25, 2021
4. Our company guarantees that the original test report (HKHL0300456) provided this time is applicable to the guarantee statement of the products of __________ contract that will be mass-produced.
5. Guarantee that the product has the following representativeness (that is, in the 20XX/11-12 months, ELDDFJIDSFSDF WIN (CAMBODIA) CO., LTD factory, using the same material, the same process production order). The test report can still be used, which has the benefit of product quality assurance.
6. Please refer to the attached file for details of the product pre-production test report number HKHL0300456.
7. It is agreed as follows:
a. Party B’s failure to faithfully perform all contract documents and both parties have agreed to modify, supplement and change, including replacement or repair of goods that you consider to be defective (hereinafter referred to as breach of contract), as long as you determine that no matter what the contractor has In case of any objection, the Bank will pay to you immediately based on your written notice of breach of contract that does not exceed the above-mentioned cumulative total amount and in the manner specified in the notice.
b. The provisions of this letter of guarantee constitute an unconditional and
irrevocable direct obligation of the Bank. Any future amendments to the terms of the contract, your time accommodating, other tolerance, concessions, or any deletion or other actions taken by you that are applicable in addition to this paragraph that may exempt the Bank from liability, cannot be cancelled or exempted The Bank’s responsibilities under this letter of guarantee.
c. This letter of guarantee is fully valid before the expiration of the warranty period stipulated in this contract.
Party A： Party B：
Signature： Signature：
Date： Date：
